DAGE104UTL-SAU3
1U 4-bay 3.5" SATA 6.0Gb/s eSATA USB3.0 Trayless JBOD Rackmount Chassis
  • Supports 4x 3.5" SATA 6Gb/s Hard Drives
  • LED Indicators for Power and Activity on Each Hard Drive
  • 2x 40mm Cooling Fans for Ventilation
  • Multi-interface Support - with USB 3.0 and eSATA (Port Multiplier) Connectors
  • Trayless Design
  • Hot-swappable Both on Host and Device
  • eSATA Chipset: JMicron JMB575
  • 150W Power Supply Included
  • Supports SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transfer rate
  • Supports individual drive mode via *eSATA or USB connection





Product Introduction
DAGE104UTL-SAU3 is an external 1U 4-bay trayless hot-swappable SATA rackmount disk array storage chassis. It provides users a most big storage capacity for four 3.5" hard drives for RAID configurations in 1U form factor. This 1U 4-bay external SATA JBOD is designed with a high quality of USB 3.0 and eSATA with Port Multiplier connectors. Two 40mm ball bearing fans offer long lasting and enhanced thermal cooling solution. DAGE104UTL-SAU3 provides maximum storage and performance to high density storage system.

Model NumberDAGE104UTL-SAU3
RoHS Compliance VersionYes
Form Factor1U
Host InterfaceeSATA/ USB 3.0
HDD Interface3.5" SATA I/II/ III
Hotswap 3.5"4
LED DisplayPower and HDD Activity
MaterialSteel
Main ColorBlack
Power Supply150W Open-frame PSU
Raid LevelConfigured by Host Controller
Cooling Fan2x40mm
Dimensions (WxHxD)19.00" x 1.75" x 15.00"
482.6 mm x 44.5 mm x 381.0 mm
Notes- *individual drive configuration is supported via eSATA controllers with Port Multiplier function. Controllers without Port Multiplier function will only recognize one single hard drive via eSATA connection.
Download
FAQ


There are no FAQ entries for this model.
Accessories

ImageAccessoryDescription
RP-RAIL-20-1U20" Sliding Rail Kit for 1U Short Rackmount Chassis

Connection Diagram
Featured Videos