Tech Support
中文 | English
  

Company

Support

Community & Society

Press Room
 
Contact Us | Manufacture |   
Newsletters   Print         Email
 
Press Room Press Releases Newsletters Reviews & Articles Products Flyers Tradeshow Media Video Media 
 
Month:      Year:



Introducing the BPU-128DE-SS HDD SSD Hot-Swap Rack
The 2.5" Disk Array BPU-128DE-SS can be set up in various configurations: as RAID 0, RAID 1, RAID 5 or JBOD, as individual drive, or whatever the mix that best fits the application. The Disk Array can start with as little as one hard drive and then expand as needed. Hard Drive can also be removed or added to the system without turning off your system power or restarting your computer.
  View the full newsletter

Get Ready for the New Year with BPU-128DE-SS Hot-Swap Rack
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing the BPU-128DE-SS HDD SSD Hot-Swap Rack
The 2.5" Disk Array BPU-128DE-SS can be set up in various configurations: as RAID 0, RAID 1, RAID 5 or JBOD, as individual drive, or whatever the mix that best fits the application. The Disk Array can start with as little as one hard drive and then expand as needed. Hard Drive can also be removed or added to the system without turning off your system power or restarting your computer.
5.25" to 8x Slim 2.5" HDD SSD
Hot-swap Rack
  • Supports HDD thickness 7mm or less
  • Plug & play, hot-swappable
  • Built-in 40mm cooling fan
  • LEDs for power and HDD accessing
  • Support 8x 2.5" slim SATA SAS 6Gb/s drives
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing the Claytek WMZ Series
Our WMZ Series is an elegant line of secured swing-out wall-mounted cabinets by CLAYTEK. The easy side panel access and swing-out design provide convenience in performing routine maintenance, but can also be locked to prevent unauthorized access. Three-way (top, bottom, and rear) cabling tunnels enable data and cable routing. The WMZ series incorporates optimal cooling design. The partially vented frames and two optional AC fans that can be put on the top panel give the wall-mount cabinet excellent air ventilation. Heat-treated glass door provides extra strength and ability to silkscreen logos, marks, and labels to boost product image.
  View the full newsletter

Claytek WMZ Series Rackmount Cabinets
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing the Claytek WMZ Series

Our WMZ Series is an elegant line of secured swing-out wall-mounted cabinets by CLAYTEK. The easy side panel access and swing-out design provide convenience in performing routine maintenance, but can also be locked to prevent unauthorized access. Three-way (top, bottom, and rear) cabling tunnels enable data and cable routing. The WMZ series incorporates optimal cooling design. The partially vented frames and two optional AC fans that can be put on the top panel give the wall-mount cabinet excellent air ventilation. Heat-treated glass door provides extra strength and ability to silkscreen logos, marks, and labels to boost product image.

WMZ-1255 12U 550mm Depth Swing-out Wallmount Server Cabinet
  • Dimensions: 23.62 x 24.99 x 21.65 inches
  • Supported Chassis Depth: 16" and under
  • Sturdy and Rugged Welded Frame Structure
  • Excellent Air Ventilation Design with Optional Dual AC Cooling Fans
  • Three Ways, Top, Bottom, and Rear Cabling Tunnels
  • Swing-out Wall-mounted Design
  • Enforced Strengthen Glass Front Door with Security Key Lock
  • Removable Side Panels with Easy Handy Latches
  • SPCC High-Quality Cold Roll Steel
  • Comes with M6 Mounting Screws and Cage Nuts

WMZ-955 9U 550mm Depth Swing-out Wallmount Server Cabinet
  • Dimensions: 23.62 x 19.74 x 21.65 inches
  • Supported Chassis Depth: 16" and under
  • Sturdy and Rugged Welded Frame Structure
  • Excellent Air Ventilation Design with Optional Dual AC Cooling Fans
  • Three Ways, Top, Bottom, and Rear Cabling Tunnels
  • Swing-out Wall-mounted Design
  • Enforced Strengthen Glass Front Door with Security Key Lock
  • Removable Side Panels with Easy Handy Latches
  • SPCC High-Quality Cold Roll Steel
  • Comes with M6 Mounting Screws and Cage Nuts
WMZ-655 6U 550mm Depth Swing-out Wallmount Server Cabinet
  • Dimensions: 23.62" x 14.49" x 21.65"
  • Supported Chassis Depth: 16" and under
  • Sturdy and Rugged Welded Frame Structure
  • Excellent Air Ventilation Design with Optional Dual AC Cooling Fans
  • Three Ways, Top, Bottom, and Rear Cabling Tunnels
  • Swing-out Wall-mounted Design
  • Enforced Strengthen Glass Front Door with Security Key Lock
  • Removable Side Panels with Easy Handy Latches
  • SPCC High-Quality Cold Roll Steel
  • Comes with M6 Mounting Screws and Cage Nuts
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing Claytek Seismic Isolators
Our Claytek series of seismic isolators introduces an anti-vibration base to absorb shaking from earthquakes in order to protect critical equipment from falling or getting damaged. The seismic isolators can be used for data centers with multiple units connected together or used as a standalone unit to prevent precise equipment from sliding or moving. They feature low profile structure, distortion resistance, heavy duty loading capacity, quick and easy installation. The seismic isolators are compatible with our iStarUSA WN cabinet series and can also be customized as needed.
  View the full newsletter

Claytek Seismic Isolators to Protect Critical Equipment
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing Claytek Seismic Isolators

Our Claytek series of seismic isolators introduces an anti-vibration base to absorb shaking from earthquakes in order to protect critical equipment from falling or getting damaged. The seismic isolators can be used for data centers with multiple units connected together or used as a standalone unit to prevent precise equipment from sliding or moving. They feature low profile structure, distortion resistance, heavy duty loading capacity, quick and easy installation. The seismic isolators are compatible with our iStarUSA WN cabinet series and can also be customized as needed.

WA-BASE10-EQ Build-to-Order - Seismic Isolator for WN 1000mm Depth Cabinet
  • Low Profile Anti-Vibration Structure
  • Heavy Duty Design, 4000+ lbs Loading Capacity
  • Distortion Resistant
  • X/Y Axis Movement
  • Easy Installation
  • Compatible with iStarUSA WN 1000mm Depth Cabinet Series- WN1510, WN2210, WN3610, WN4210
  • Widely Used for Data Center, Storage, Antique, Precise Equipment, etc

WA-BASE8-EQ Build-to-Order - Seismic Isolator for WN 800mm Depth Cabinet
  • Low Profile Anti-Vibration Structure
  • Heavy Duty Design, 4000+ lbs Loading Capacity
  • Distortion Resistant
  • X/Y Axis Movement
  • Easy Installation
  • Compatible with iStarUSA WN 1000mm Depth Cabinet Series- WN158, WN228, WN368, WN428
  • Widely Used for Data Center, Storage, Antique, Precise Equipment, etc
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing the Claytek WNG Series
Our WNG series cabinets are built with high-quality aluminum/steel structures. With a perforated metal rear door and a vented glass front door, the WNG series provides excellent air circulation for servers and other devices. The cabinets are lockable from the front and rear doors to prevent unauthorized access. The stylish and secure rackmount cabinets protect your investment in mission-critical equipment.
  View the full newsletter

Claytek WNG Series Rackmount Cabinets
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing the Claytek WNG Series

Our WNG series cabinets are built with high-quality aluminum/steel structures. With a perforated metal rear door and a vented glass front door, the WNG series provides excellent air circulation for servers and other devices. The cabinets are lockable from the front and rear doors to prevent unauthorized access. The stylish and secure rackmount cabinets protect your investment in mission-critical equipment.

WNG-3210 32U 1000mm Depth Rackmount Server Cabinet
  • Form Factor: 32U
  • Supported Depth: 32" and under
  • Dimensions: 23.62 x 63.41 x 42.90 inches
  • Universal Fit for most rackmount chassis and equipment
  • Easy Cabling Management. Cable Entry Provided from Top/ Bottom and Front/ Back
  • Fully Adjustable Rails. Mounting Rails are Horizontally Adjustable to Ensure the Best Fit of Rack-mount Chassis
  • Glass and Perforated Doors Provide Maximum Air Flow
WNG-2710 27U 1000mm Depth Rackmount Server Cabinet
  • Form Factor: 27U
  • Supported Depth: 32" and under
  • Dimensions: 23.62 x 54.66 x 42.90 inches
  • Universal Fit for most Rackmount Chassis and Equipment
  • Easy Cabling Management. Cable Entry Provided from Top/ Bottom and Front/ Back
  • Fully Adjustable Rails. Mounting Rails are Horizontally Adjustable to Ensure the Best Fit of Rack-mount Chassis
  • Glass and Perforated Doors Provide Maximum Air Flow
WNG-1810 18U 1000mm Depth Rack-mount Server Cabinet
  • Form Factor: 18U
  • Supported Depth: 32" and under
  • Dimensions: 23.62 x 38.91 x 42.90 inches
  • Universal Fit for most Rackmount Chassis and Equipment
  • Easy Cabling Management. Cable Entry Provided from Top/ Bottom and Front/ Back
  • Fully Adjustable Rails. Mounting Rails are Horizontally Adjustable to Ensure the Best Fit of Rack-mount Chassis
  • Glass and Perforated Doors Provide Maximum Air Flow
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing FactorySmith's Waterproof Chassis
With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our line of waterproof chassis created for a variety of different builds.
  View the full newsletter

Introducing FactorySmith Waterproof Chassis
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing FactorySmith's

With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our line of waterproof chassis created for a variety of different builds.

Featuring: FS-1700WP Waterproof chassis for Mini-ITX

  • Waterproof server chassis for Mini-ITX Motherboard (IMB-180)
  • 2.5" HDD Internal Drive Bay
  • 2 x Front USB 3.0 slots
  • SGCC Material
  • Dimensions: 10.30" x 3.83" x 8.94"

Featuring: FS-1710WP Waterproof chassis for Mini-ITX

  • Waterproof server chassis for Mini-ITX Motherboard (IMB-180)
  • 2.5" HDD Internal Drive Bay
  • 3 x Front USB 3.0 slots
  • SGCC Material
  • Dimensions: 10.30" x 4.78" x 8.94"
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing FactorySmith's Fanless Series
With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our fanless series created for a variety of different builds:
  View the full newsletter

Introducing FactorySmith Fanless Series
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing FactorySmith's

With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our fanless series created for a variety of different builds:

FS-1320 Fanless chassis with innovative passive thermal cooling - specially designed for VIA Pico-ITX PX series
  • Designed specially for VIA Pico-ITX PX series motherboard
  • Innovative thermal cooling - combination of thermal pads and copper thermal blocks
  • Enhanced thermal solution - Extensive aluminum-made heat sink
FS-11101 1U rackmount fanless chassis for Mini-ITX
  • Dual extensive aluminum-made heat sinks
  • Primary heat sink for CPU: TDP 35W; Secondary heat sink forexpansion card: TDP 45W.
  • Supports 1 x expansion slot; 2 x 2.5" hot-swap
FS-1351 Tower fanless chassis for Mini-ITX motherboard
  • Tower design, plenty of space for I/O. Supports standard plate I/O.
  • Silent, dust-free & energy-efficient operation. (TDP > 35W)
  • Expansion slot x 2. Supports wall mounted bracket (Optional)
  • Innovative thermal cooling - combination if thermal pads and copper thermal blocks.
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Happy Thanksgiving
  View the full newsletter

Happy Thanksgiving from iStarUSA
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing FactorySmith's 4U Rackmount Chassis
With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our line of 4U rackmount chassis created for a variety of different builds.
  View the full newsletter

Introducing FactorySmith IPC 4U Rackmount Chassis
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing FactorySmith's

With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our line of 4U rackmount chassis created for a variety of different builds.

Featuring: FS-14840 4U rackmount chassis for server boards
  • 4U rackmount server chassis for server motherboards (12" x 13")
  • Supports: 7 x expansion slots, 4 x hot swappable 3.5" HDD
  • Steel construction design for industrial application

The FS-14840 is a 4U rackmount chassis that supports up to an EATX System. It features 4 x hot swappable 3.5" HDD , 3 x front mounted 80mm fan with front accessible fan filter, and 2 x 80mm rear mounted fans for maximum cooling. It supports 2 x 5.25" external devices, 2 x 3.5" or 2 x 2.5" HDD, and PS II ATX or Mini Redundant power supply.

Featuring: FS-14940 4U rackmount chassis for server boards
  • 4U rackmount server chassis for 12"x13" server board system
  • Supports 4 x hot swappable 3.5" HDD
  • Multi I/O in the front
  • Excellent cooling with 3 x 12cm fan

The FS-14940 is a unique 4U rackmount chassis featuring front facing 14 slots for 14 slots Backplane or Server board, 3 x 12cm rear mounted fan for maximum cooling. It supports 4 x hot swappable 3.5" HDD, and PS II ATX or Mini Redundant power supply.

Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing FactorySmith's 3U Rackmount Chassis
With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our line of 3U rackmount chassis created for a variety of different builds.
  View the full newsletter

Introducing FactorySmith IPC 3U Rackmount Chassis
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing FactorySmith's

With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our line of 3U rackmount chassis created for a variety of different builds.

Featuring: FS-13280 3U Rackmount chassis for 2 x Mini-ITX systems.
  • 3U rackmount server chassis for 2 x Mini-ITX motherboards
  • Removable fan cage door and filters; DC cooling fans
  • Steel construction for industrial applications.

The FS-13280 is a 3U rackmount chassis support dual Mini-ITX System. It is equipped with 8 x hot swappable 3.5" drive bays, 2 x front accessible fan filters. It supports 2 x 2.5" and 2 x 3.5" HDD, 2 x full height expansion cards and dual FLEX ATX power supply.

Featuring: FS-13340 3U Rackmount chassis for Micro-ATX systems
  • 3U rackmount server chassis designed for Micro-ATX boards
  • Supports: 4 x expansion slots, 4 x Hot Swap 3.5" drive bays
  • DC cooling fan, Steel construction for industrial application

The FS-13340 is a 3U rackmount chassis support MATX System. It is equipped with 4 x hot swappable 3.5" drive bays, 3 x front mounted 80mm fans with front accessible fan filters, plus 2 x 60mm rear-mounted fans for maximum cooling. It supports a slim optical drive, 3 x 3.5" HDD, and PS II ATX power supply.

Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing FactorySmith's 2U Rackmount Chassis
With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our line of 2U rackmount chassis created for a variety of different builds.
  View the full newsletter

Introducing FactorySmith IPC 2U Rackmount Chassis
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing FactorySmith's

With FactorySmith, we have customized solutions tailormade for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well-documented design drawing database in place. We have modules of all types that will fit your project and greatly expedite the turnaround time. Every product featured in our FS brand is not kept in our standard inventory and is exclusively reserved for OEM/ODM. Check out our line of 2U rackmount chassis created for a variety of different builds.

Featuring: FS-12242 2U Rackmount chassis for 2 x Mini-ITX systems
  • 2U rackmount server chassis with two mini-ITX systems
  • Standard I/O shield in the front design for easy access
  • 2 x 8 cm two ball bearing fans
  • Steel construction design for industrial environment
  • Support up to 4 x 3.5 Serial ATA trays
Featuring: FS-12440 2U Rackmount chassis for ATX systems
  • 2U industrial rackmount platform for ATX motherboards
  • Supports: 4 x hot-swap, 7 x low profile expansion
  • Excellent cooling system with 2 x 80mm front fan
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



FactorySmith 1U and 1.5U Rackmount Chassis
FactorySmith - We have customized solutions tailor-made for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well documented design drawing database in place. We have modules of all types that that will fit your project and greatly expedite the turnaround time.
  View the full newsletter

FactorySmith 1U and 1.5U IPC Rackmounts
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
FactorySmith 1U and 1.5U Rackmount Chassis
FactorySmith - We have customized solutions tailor-made for your OEM/ODM IPC project. Our expertise lies in our strong design, engineering and manufacturing capability. We have a well documented design drawing database in place. We have modules of all types that that will fit your project and greatly expedite the turnaround time.

Check out our lines of 1U and 1.5U rackmount chassis. The FS-1140 is a
1U industrial rackmount platform accepting 4 x Pico-ITX motherboard. The FS-11900 is a 1U rackmount server chassis for Mini-ITX systems. Another highlight is the FS-19112, a 1.5U rackmount server chassis with mini-ITX system. Both the FS-11900 and FS-19112 are designed with front IO, while typical chassis IO is at the rear. It is a distinguishing feature that is hard to find from other products off the shelf.
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing the Build-to-Order 4U 14 Slot Industrial PC Rackmount Chassis
The D-402A-14 rackmount chassis provides your server a sturdy structure, reliability and performance with an all-steel design. The enclosure features a lockable front door that secures four front accessible 5.25" drive bays for fixed or removable media, as well as optional internal brackets that, based on unit configuration, can host one 3.5" drive. This is the ideal high capacity, low profile, (only 4U high) system or server enclosure. The D-403A-14 4U Compact Rackmount Chassis has the durability and flexibility for any situation or task required. The solid steel construction and removable air filter help this chassis stand up to the most rigorous of conditions. The chassis accepts a full size ATX motherboard or 14 slot industrial backplane. The secure locking 5.25" bay prevents unauthorized access to all of your precious information. The D-403A-14 is the ultimate solution for durable and secure computing.
  View the full newsletter

iStarUSA 4U 14-Slot Industrial PC Rackmount Chassis
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing the Build-to-Order
4U 14 Slot Industrial PC Rackmount Chassis
The D-402A-14 rackmount chassis provides your server a sturdy structure, reliability and performance with an all-steel design. The enclosure features a lockable front door that secures four front accessible 5.25" drive bays for fixed or removable media, as well as optional internal brackets that, based on unit configuration, can host one 3.5" drive. This is the ideal high capacity, low profile, (only 4U high) system or server enclosure.

The D-403A-14 4U Compact Rackmount Chassis has the durability and flexibility for any situation or task required. The solid steel construction and removable air filter help this chassis stand up to the most rigorous of conditions. The chassis accepts a full size ATX motherboard or 14 slot industrial backplane. The secure locking 5.25" bay prevents unauthorized access to all of your precious information. The D-403A-14 is the ultimate solution for durable and secure computing.

D-402A-14 Features:
  • Front Access USB2.0 x2
  • 120mm x1 Cooling Fan
  • Removable Air Filter
  • Power and HDD LED
  • Power and Alarm Reset Switch
  • Supports PICMG Backplane, 14 Slot Backplane
  • Black Color option
D-403A-14 Features:
  • Front Access USB2.0 x2
  • 120mm x1 Cooling Fan
  • Removable Air Filter
  • Power and HDD LED
  • Power and Alarm Reset Switch
  • Supports 14 Slot Industrial Backplane
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing FactorySmith: We have customized solutions tailor-made for your OEM/ODM IPC project.
Introducing FactorySmith: We have customized solutions tailor-made for your OEM/ODM IPC project. Our expertise is demonstrated in our strong design, engineering and manufacturing capability. We have a well documented design drawing database in place. We have modules of all types that that will fit your project and greatly expedite the turnaround time. FS brands main product lines are: IPC Fanless Chassis, Panel PC, Wallmount, and ITX Rackmount Chassis. Every product featured in our FS brand are not kept in our standard inventory and are exclusively reserved for OEM/ODM.
  View the full newsletter

Introducing FactorySmith: Custom Solutions For Your OEM/ODM IPC Project
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing FactorySmith: We have customized solutions tailor-made for your OEM/ODM IPC project. Our expertise is demonstrated in our strong design, engineering and manufacturing capability. We have a well documented design drawing database in place. We have modules of all types that that will fit your project and greatly expedite the turnaround time. FS brands main product lines are: IPC Fanless Chassis, Panel PC, Wallmount, and ITX Rackmount Chassis. Every product featured in our FS brand are not kept in our standard inventory and are exclusively reserved for OEM/ODM.
FactorySmith Product Showcase
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Richard.Landry@CasinoTech.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Introducing the Build-to-Order Compact Stylish Industrial Wall-Mounted Chassis, DW-101 and DW-102
The DW-101 and DW-102 Wall-mounted Chassis have the durability and flexibility to handle any task required. The solid steel construction and removable air filters help these chassis stand up to the most rigorous of conditions. The DW-101 accepts full size ATX motherboards as well as a front size seven slot I/O for any endless expansion. The DW-102 accepts full size ATX motherboards as well 1 x 5.25" and 2 x 3.5" drive bays for flexible storage.
  View the full newsletter

iStarUSA Industrial Wall-Mounted Chassis
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Introducing the Build-to-Order Compact Stylish
Industrial Wall-Mounted Chassis, DW-101 and DW-102
The DW-101 and DW-102 Wall-mounted Chassis have the durability and flexibility to handle any task required. The solid steel construction and removable air filters help these chassis stand up to the most rigorous of conditions.

The DW-101 accepts full size ATX motherboards as well as a front size seven slot I/O for any endless expansion. The DW-102 accepts full size ATX motherboards as well 1 x 5.25" and 2 x 3.5" drive bays for flexible storage.
DW-101 Features:
  • Front I/O with Seven Expansion Slots
  • 120mm x1, 40mm x1 Cooling Fan
  • Removable Air Filter
  • Power and HDD LED
  • Power and Alarm Reset Switch
  • Support ATX Motherboard
DW-102 Features:
  • Front Access USB2.0 x2
  • 120mm x1, Ball-bearing Cooling Fan
  • Removable Air Filter
  • Power and HDD LED
  • Power and Alarm Reset Switch
  • Support up to ATX Motherboard
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



See the Features of iStarUSA's RG-4400HF RUGGED Rackmount Chassis
The RG-4400HF rugged rackmount chassis is designed to withstand the toughest environments requiring industrial grade spill proof protection and fit in companct spaces. The RG-4400HF is designed with a spill proof bezel, 1.6mm heavy-duty SECC steel, and shock absorbant drive cage for maximum protection. This 4U rugged rackmount chassis is designed with 2 front access USB2.0 ports, 4x 5.25" bays. The RG-4400HF is the most versatile and toughest rackmount chassis for critical applications.
  View the full newsletter

iStarUSA RG-4400HF RUGGED Chassis Features Video
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
See the Features of iStarUSA's RG-4400HF RUGGED Rackmount Chassis
The RG-4400HF rugged rackmount chassis is designed to withstand the toughest environments requiring industrial grade spill proof protection and fit in companct spaces. The RG-4400HF is designed with a spill proof bezel, 1.6mm heavy-duty SECC steel, and shock absorbant drive cage for maximum protection. This 4U rugged rackmount chassis is designed with 2 front access USB2.0 ports, 4x 5.25" bays. The RG-4400HF is the most versatile and toughest rackmount chassis for critical applications.
  • Durable 1.6mm SGCC with rugged construction
  • Anti-vibration HDD cage reduces shock and vibration
  • 4x 90mm blower fans in front and back of chassis for effective airflow and cooling; fans have hot-swap capability for easy maintenance
  • Power and reset buttons mounted behind door to prevent unintended access
  • Removable front plate with filter mounted; easy access to drive cage
  • Compatible with E-ATX, ATX, and microATX motherboards
  • Power LED and HDD access indicator are visible through front bezel window
  • 7-slot retainer included to enhance stability for long add-on cards
  • Compatible with redundant power supplies for zero down time
  • Optional rear fan duct for noise reduction
  • Optional lockable spill-proof front bezel
Learn more at: http://www.istarusa.com/es/istarusa/products.php?model=RG-4400HF

And learn more about the Hot-Swap Rack featured in the video here:
http://www.istarusa.com/es/istarusa/products.php?model=T-G525-SS
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Richard.Landry@CasinoTech.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



See the Features of iStarUSA's D-3100HM 3U MicroATX Chassis
The D-3100HM is designed with elegance and functionality fit for Home Theater Personal Computer (HTPC) in mind. With the advancement of server racks for home, these models are ideal for both rackmount and desktop orientation. With storage capacity up to 8 TB per each bay, the tray-less drive cage maximizes data storage and backup functionality at the same time. These series are ideal platform for HTPC build using popular AMD and Intel processors
  View the full newsletter

iStarUSA D-3100HN MicroATX Chassis Features Video
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
See the Features of iStarUSA's D-3100HM 3U MicroATX Chassis
The D-3100HM is designed with elegance and functionality fit for Home Theater Personal Computer (HTPC) in mind. With the advancement of server racks for home, these models are ideal for both rackmount and desktop orientation. With storage capacity up to 8 TB per each bay, the tray-less drive cage maximizes data storage and backup functionality at the same time. These series are ideal platform for HTPC build using popular AMD and Intel processors
  • 10 trayless and hotswappable 3.5" bays for HDD quick swap
  • Supports standard ATX power supplies
  • Compatible with redundant power supplies
  • USB 3.0 in front for easy access
  • Sleek aluminum front w/ various color options for HDD handles
  • Rackmount or desktop convertible
  • Supports 6.0 Gb/s hard drives
Learn more at: http://www.istarusa.com/es/istarusa/products.php?model=D-3100HN
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Richard.Landry@CasinoTech.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



iStarUSA's Global website is now online.
iStarUSA's Global website is now online. We have now added Spanish, Korean, and Japanese to our robust list of languages (English, Traditional/Simplified Chinese, German, Russian, and Hebrew) offered by iStarUSA.Our vision is to make our IPC products available across the world. Please visit us today to learn about our products in your language and partner with us.
  View the full newsletter

iStarUSA Global Website Now With Support for Spanish, Korean, and Japanese
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
iStarUSA's Global website is now online. We have now added Spanish, Korean, and Japanese to our robust list of languages (English, Traditional/Simplified Chinese, German, Russian, and Hebrew) offered by iStarUSA.Our vision is to make our IPC products available across the world. Please visit us today to learn about our products in your language and partner with us.
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Richard.Landry@CasinoTech.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Come Talk With Us About iStarUSA's OEM/ODM Services
Come talk with us today about how iStarUSA can help you with your OEM/ODM project. We have an expert team that will walk you through every step to ensure that the final product matches your vision and your standards.
  View the full newsletter

Come Talk With Us About iStarUSA's OEM/ODM Services
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Come Talk With Us About iStarUSA's OEM/ODM Services
Come talk with us today about how iStarUSA can help you with your OEM/ODM project. We have an expert team that will walk you through every step to ensure that the final product matches your vision and your standards.
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Richard.Landry@CasinoTech.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Claytek provides server cabinets and racks for your mission-critical applications, keeping your equipment and data up and running. Our products protect against heat and dust, and are designed to be convenient, practical, and secure.
Claytek provides server cabinets and racks for your mission-critical applications, keeping your equipment and data up and running. Our products protect against heat and dust, and are designed to be convenient, practical, and secure.
  View the full newsletter

New Products from iStarUSA's Cabinet Group, Claytek
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Claytek provides server cabinets and racks for your mission-critical applications, keeping your equipment and data up and running. Our products protect against heat and dust, and are designed to be convenient, practical, and secure.
For a complete list of our products visit us at:
http://www.istarusa.com/en/claytek/productcategory.php

All of our prodcuts can be customized for your unique needs. To start your project today:
http://www.istarusa.com/en/oemodm/
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



iStarUSA Chassis Watercooled for LinusTechTips Video Editing Server
Youtube media group, LinusTechTips used our iStarUSA D-200L Chassis to create a watercooled server for their video editing team to export footage. Click here to watch their video of the build: https://youtu.be/-HO6Ys3PPIw
  View the full newsletter

Video: iStarUSA Chassis Watercooled for Video Editing Server
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

iStarUSA Chassis Watercooled for LinusTechTips Video Editing Server

Youtube media group, LinusTechTips used our iStarUSA D-200L Chassis to create a watercooled server for their video editing team to export footage. Click here to watch their video of the build: https://youtu.be/-HO6Ys3PPIw


To learn more about the chassis that was used and to see how you can purchase one for your own build, please visit us at:
http://www.istarusa.com/istarusa/products.php?model=D-200L
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



iStarUSA WRT Retro Cabinet Featured on LinusTechTips
Popular Tech Youtube channel, LinusTechTips recently praised the design and build of our WRT Retro Cabinets in a recent video: https://youtu.be/AgiJx0rSTPE
  View the full newsletter

iStarUSA WRT Retro Cabinet Featured on LinusTechTips
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

iStarUSA WRT Retro Cabinet Featured on LinusTechTips

Popular Tech Youtube channel, LinusTechTips recently praised the design and build of our WRT Retro Cabinets in a recent video: https://youtu.be/AgiJx0rSTPE



The 9U 450mm WRT-945 has found a permenant home on the set of their weekly WAN Show hosting all of their audio equipment. See more on how it came to to be a permenant fixture on the LinusTechTips set in the video here: https://youtu.be/4OeEs3yor64
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



High Performance Cables from iStarUSA
Rodaled - powered by iStarUSA Group. Rodaled provides reliable, high-performance storage and network cables for data centers, multimedia systems, academic institutions, small office/home office (SOHO), industrial environments, and more. In addition to providing the latest HD miniSAS, SFP+, and QSFP+ cables, we also offer active optical cables for long-distance and high-performance solutions. In addition, if you have any specific requirements for your mission-critical applications, we offer custom cable solutions with high-quality materials to meet your needs.
  View the full newsletter

Rodaled, High Performance Cables from iStarUSA
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

High Performance Cables from iStarUSA

Rodaled - powered by iStarUSA Group. Rodaled provides reliable, high-performance storage and network cables for data centers, multimedia systems, academic institutions, small office/home office (SOHO), industrial environments, and more. In addition to providing the latest HD miniSAS, SFP+, and QSFP+ cables, we also offer active optical cables for long-distance and high-performance solutions. In addition, if you have any specific requirements for your mission-critical applications, we offer custom cable solutions with high-quality materials to meet your needs.
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



iStarUSA Industrial Hot Swap Cages
Our Hot Swap Cages feature a unique patented screwless HDD mounting design, high performance SAS/SATA 6.0Gb/s interface, and easy swap tray. Our cages are designed to be tough for any industrial use but flexible in functionality. The LED display light features a blue light to show hard drive power and a red light for HDD accessing. And the metal security key lock prevents unauthorized access to your important hard drives.
  View the full newsletter

iStarUSA Hot Swap Cage for Any Size Hard Drive
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

iStarUSA Industrial Hot Swap Cages

Our Hot Swap Cages feature a unique patented screwless HDD mounting design, high performance SAS/SATA 6.0Gb/s interface, and easy swap tray. Our cages are designed to be tough for any industrial use but flexible in functionality. The LED display light features a blue light to show hard drive power and a red light for HDD accessing. And the metal security key lock prevents unauthorized access to your important hard drives.
  • Patented Screwless HDD Mounting Design for Standard HDDs and SSDs
  • Metal Body for Best Heat Dissipation
  • High Performance Transfer Rate up to 6.0 Gb/s
  • Support 2.5" SAS I/II & SATA I/II/III HDD
  • Supports 6.0 Gb/s Hard Drives
  • Thumbscrews for Easy HDD Swaps

T-G525-SS 5.25" to 3.5" 2.5" SATA SAS 6 Gbps HDD SSD Hotswap Rack:
http://www.istarusa.com/anh/products.php?series=HDDCage&sub=SATA/ SAS&model=T-G525-SS

T-G35-SS 3.5" to 2.5" SATA SAS 6 Gbps HDD SSD Hot-swap Rack:
http://www.istarusa.com/anh/products.php?series=HDDCage&sub=SATA/ SAS&model=T-G35-SS

Facebook
Google Plus
Twitter
LinkedIn
This message was sent to ivan.pencoff@fotf.org by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse


This is a Test Email only.
This message was sent for the sole purpose of testing a draft message.



Custom Rackmount Cabinets from Claytek
Claytek offers a multitue of Rackmount Cabinets and Open Frame Racks for your OEM/ODM projects. Today we highlight our rugged shockmount WSM Series cabinets with anti-vibration technology. Our WSM Series cabinets feature a high-quality aluminum/steel structure and comes with sturdy handles for easy mobility. Optional front and rear covers are able to prevent your critical systems from collision damage. This stylish and secured 19" cabinet is optimized for small business, research institutions, and professional studio.
  View the full newsletter

Custom Rackmount Cabinets from Claytek
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

Custom Rackmount Cabinets from Claytek

Claytek offers a multitue of Rackmount Cabinets and Open Frame Racks for your OEM/ODM projects. Today we highlight our rugged shockmount WSM Series cabinets with anti-vibration technology.

Our WSM Series cabinets feature a high-quality aluminum/steel structure and comes with sturdy handles for easy mobility. Optional front and rear covers are able to prevent your critical systems from collision damage. This stylish and secured 19" cabinet is optimized for small business, research institutions, and professional studio.
  • Rugged Shockmount Style
  • Patent Design on Industrial Spring under Cabinet Post Cage
  • Portable Handle
  • Anti-Vibration Design
  • Universal Fit Most of Rackmount Chassis and Equipment
  • Optional Front/ Rear Lockable Covers
  • Optional Casters
  • Comes with M5 Mounting Screws and Cage Nuts
  • Comes in 6U, 9U, and 15U sizes

6U WSM-660: http://www.istarusa.com/claytek/products.php?series=Enclosed&sub=WSM&model=WSM-660

9U WSM-960: http://www.istarusa.com/claytek/products.php?series=Enclosed&sub=WSM&model=WSM-960

15U WSM-1560: http://www.istarusa.com/claytek/products.php?series=Enclosed&sub=WSM&model=WSM-1560

Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

iStarUSA Vintage Rackmount Cabinet
  View the full newsletter

Now in Stock! iStarUSA Vintage Rackmount Cabinet
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

iStarUSA Vintage Rackmount Cabinet

Ever since we released our WRT series Vintage Rackmount Cabinets, the response has been overwhelming! Many of you have been asking so we're here to announce that the WRT series is currently in stock and available for purchase!

Please visit us at the link below for more more details and purchasing information.
The WRT series is a retro style cabinet designed for individuals and companies who want a rackmount solution that matches their design aesthetic. We've taken everything that's great about our cabinets like the high-quality steel construction and wrapped it in a handsome canvas outer body with wood and leather trim with brass accents.

This eyecatching design is perfect for creative spaces that need rackmount solutions like a home studio, post-production house, or other spaces with audio/video needs.

  • Compatible with Most of Rackmount Chassis and Equipment
  • Quick Access to Rackmount System
  • Stylish Yet Sturdy Leather Handles
  • Genuine Leather Corner Guards
  • High-quality Steel Structure
  • Discreet Non-scratch Feet
  • Compact Form Factor
  • Tapped Mounting Holes (M5 size) for Audio/Video Equipment
  • Sizes from 6U to 21U with 450mm and 600mm depth options
Please visit us at the link below for more information or to contact us to learn more:
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

Let Claytek Design, Build, and Test your OEM/ODM Cabinets
  View the full newsletter

New Video - Let Claytek Design, Build, and Test Your OEM/ODM Cabinets
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.
Let Claytek Design, Build, and Test your OEM/ODM Cabinets
No matter what your specficiations are, Claytek can help you design, customize, and manufacture your OEM/ODM Cabinets. Click the video below to see more or for a direct link, go to: https://www.youtube.com/watch?v=AOG7IiKWkmI
Claytek also has the facilites necessary to conduct testing on your products. See an example below of our seismic testing facility in action or visit the direct link at: https://www.youtube.com/watch?v=386tcw5naHg
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

iStarUSA at the International Broadcast Equipment Exhibition Trade Show in Japan
  View the full newsletter

iStarUSA at the Inter BEE Trade Show in Japan
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

iStarUSA at the International Broadcast Equipment Exhibition Trade Show in Japan

iStarUSA had its first trade show in Japan at Inter BEE 2016, a show highlighting the lastest in technology for video, audio, and communications professionals in Japan with exhibitors from around the world.

We're honored to have been able to participate and the response we've from many of the individuals and companies who attended has been incredible.

We look forward to working with new customers in Japan and expanding our products and services to other countries soon!
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

5.25" to Combo Slim ODD, 2.5" HDD, and USB 3.0 Hub
  View the full newsletter

5.25" to Combo Slim ODD, 2.5" HDD, and USB 3.0 Hub
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

5.25" to Combo Slim ODD, 2.5" HDD, and USB 3.0 Hub

Our T-5K25TU-SA combo drive cage takes a standard 5.25" drive space and manages to squeeze in a slim optical drive bay, a 2.5" hotswappable SATA drive bay and two USB 3.0 ports in the front for easy access. This device provides flexibility to fully utilize your system chassis.

Features:
  • High performance transfer rate up to 6.0 Gb/s
  • 2.5" hotswappable and trayless drive bays with key lock
  • Supports SATA I/II/III 6.0 Gb/s hard drive
  • Supports slim optical disc drive
  • Supports two USB 3.0 ports
  • Constructed with metal body, plastic ABS front panel, and metal latch for heavy use
  • Support standard 2.5" HDD/SSD with 9.5mm thickness
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

Convenient, Mobile 600mm and 900mm 4-Post Open Frame Racks
  View the full newsletter

Convenient, Mobile 4-Post Open Frame Racks from Claytek
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

Convenient, Mobile 600mm and 900mm 4-Post Open Frame Racks

Our Claytek WOS 600mm and 900mm 4-post open frame racks are built with high-quality aluminum/steel structures. These systems are equipped with casters provide ultimate mobility to move your rackmount equipment easily to any location. This stylish 19" open frame rack is a cost-effective solution for rack-mount devices and optimized for SOHOs, small business, research institutions, and etc.

Features:

  • Universal Fit Most of Rackmount Chassis and Equipment
  • Easy and Quick Installation
  • Ultra Lightweight, Easy to Transport with Casters
  • Open-frame Construction for Max Air Flow
  • Enables Quick Access to Rackmount System
  • Locking Mechanism Design on Casters
  • Compatible with HP/Dell/ IBM servers equipped with sliding rails
  • Comes with M5 Mounting Screws and Cage Nuts
  • Cost-effective Solution for Rackmountable Equipment
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

High Speed, Compact Storage: 12Gbps HD miniSAS Hot-swap Rack
  View the full newsletter

Fit 4x2.5" SSDs in a 5.25" Bay with Our MiniSAS Hot-swap Rack
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

High Speed, Compact Storage:
12Gbps HD miniSAS Hot-swap Rack

Today we're featuring the BPU-124DE-HD from Anhsin. This 12 Gbps HD miniSAS enclosure adds extra storage and hot-swap capability to satisfy any application needs. Its aluminum construction provides excellent heat dissipation and is designed with excellent front to back airflow cooling from two 40mm fans. The BPU-124DE-HD is an ideal solution for 2.5" HDD/SSD RAID and JBOD applications.
  • High Performance Transfer Rate Up to 12 Gbps
  • All Aluminum Material Solid Construction
  • Built-In 2 x 40mm Cooling Fans
  • LEDs for Power & HDD Activity
  • Supports 4 x 2.5" SATA and SAS HDDs
  • Supports HDD Thickness from 7 to 15 mm
  • HD miniSAS SFF-8643 connector
To purchase or learn more please visit us at the link below:
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

4U Compact Rackmount E-ATX Chassis from iStarUSA
  View the full newsletter

Introducing the Shallowest E-ATX Chassis We've Ever Designed
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

4U Compact Rackmount
E-ATX Chassis from iStarUSA

Today we're introducing the D-412, the most compact E-ATX chassis we've ever designed! At a depth of 16" this 4U chassis is perfect for squeezing a full size motherboard into tight spaces.
    • Fits microATX/ATX/E-ATX motherboards
    • Supports 7x Full Height Add-on Cards
    • Supports ATX PS2/ Mini-Redundant Power Supply
    • 2x 80mm Cooling Fans
    • Supports 2x Front Access USB2.0
To purchase or learn more about the D-412 Please visit us at the link below:
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

D-250-ITX Chassis for Media Centers and A/V use
  View the full newsletter

New iStarUSA Chassis for Media Centers or A/V
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

D-250-ITX Chassis for
Media Centers and A/V use

Today we're featuring our newest product, the D-250-ITX, a super compact 2U chassis with 5x 3.5" hot-swap bays with room for one additional 5.25" bay.
http://www.istarusa.com/istarusa/products.php?model=D-250-ITX#.V9DCXjUyMb5
  • Takes mini-ITX motherboards
  • 5x hotswappable 3.5" drive bays
  • Compatible with 1U flex power supply
  • Sleek aluminum front panel
  • Power & HDD indicators in the front
  • Includes one 5.25" bay
This compact chassis is designed to fit the needs of A/V professionals or other users who need a rackmount solution to fit in tight spaces that also provides a lot of storage.

Please visit us at the link below for more information or to contact us to learn more:
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

New Claytek Cabinet or Rack Selector
  View the full newsletter

New Claytek Cabinet or Rack Selector
View this email in your browser
You are receiving this email because of your relationship with iStarUSA Group. Please reconfirm your interest in receiving emails from us. If you do not wish to receive any more emails, you can unsubscribe here.

New Claytek Cabinet or Rack Selector

We have a new search tool to make it faster and easier to find your new Claytek rack or cabinet.

Step 1:
Chose your product type from enclosed cabinets, wall mounted racks, or open racks

Step 2:
Choose the form factor from 1U to over 22U

Step 3:
Choose your chassis depth

Try it out today at the link below or if you have more specific needs contact us about custom OEM/ODM cabinet solutions for your buiness!
Facebook
Google Plus
Twitter
LinkedIn
This message was sent to Jimmy@istarusa.com by news@istarusa.com
727 Phillips Drive, City of Industry, CA, 91748


Unsubscribe from all mailings Unsubscribe | Manage Subscription | Forward Email | Report Abuse

Q&A Video - Materials and Finishes used in iStarUSA products
  View the full newsletter

Q&A Video - Materials and Finishes Used in iStarUSA Products